in-C041 Patient Monitor Wall Mount Ambulance Multiparameter Patient Monitor Price

Portable patient monitor

12.1" color TFT screen 
Multi-channel display 
Big font interface
ST and arrhythmia analysis
Drug dose calculation and titration table
OxyCRG dynamic view display
Respiration monitoring with apnea alarms

Alarm review, arrhythmia review 
Patient info. Input 
Anti-defibrillation design
NIBP over pressure protection
Plug-in rechargeable battery, AC/DC available. 
Supporting wire or wireless network.

Technical Specifications for Portable patient monitor
b
Lead Mode 5 Leads (R, L, F, N, C or RA, LA, LL, RL,V) 
Lead selection I, II, III, avR, avL, avF, V
Wavef orm 2 ch
Lead mode 3 Leads ( R, L, F or RA, LA, LL) 
Lead selection I, II, III,
Wave form 1 ch
Gain 2.5mm/mV, 5.0mm/mV, 10mm/mV,20mm/mV, auto

HR and Alarm Range Adult 15 ~ 300 bpm
Neo/Ped 15 ~ 350 bpm
Accuracy ±1% or±1bpm, which is greater
Resolution 1 bpm 
Sensitivity > 200 (uVp-p) 
Differential Input Impedance > 5 MΩ

CMRR Monitor > 105 dB 
Operation > 105 dB 
Diagnosis > 85 dB
Electrode offset potential ±300mV 
Leakage Current < 10 uA
Baseline Recovery < 3 S After Defi. 
ECG Signal Range ±8 m V ( Vp-p )

Bandwidth Surgery 1 ~ 20 Hz
Monitor 0.5 ~ 40 Hz
Diagnostic 0.05 ~ 130 Hz
Calibration Signal 1 (mVp-p), Accuracy:5%
ST Segment Monitoring Range Measure and Alarm -2.0 ~ +2.0 mV

ARR Detecting Type: ASYSTOLE, VFIB/VTAC, COUPLET, BIGEMINY, TRIGEMINY, R ON T, VT>2,BRADY, MISSED BEATS,
PNP, PNC,Alarm Available,Review Available
 

Respiration
Method Impedance between R-F(RA-LL)
Differential Input Impedance > 2.5 MΩ
Measuring Impedance Range 0.3~3 Ω
Base line Impedance Range 200~4 KΩ
Bandwidth 0.1~2.5Hz
Resp. Rate Measuring and Alarm Range
Adult 0 ~ 120 Brpm 
Neo/Ped 0 ~ 150 Brpm 
Resolution 1 Brpm 
Accuracy ±2 Brpm

Apnea Alarm 10 ~ 40 S

NIBP
Method Oscillometric
Mode Manual, Auto, STAT 
Measuring Interval in AUTO Mode 1, 2, 3, 4, 5, 10, 15, 30, 60, 90,120, 180, 240,480 (Min)
Measuring Period in STAT Mode 5 Min
Pulse Rate Range 40 ~ 240 bpm
Alarm Type SYS, DIA, MEAN

Measuring and alarm range Adult Mode
SYS 40 ~ 270 mmHg 
DIA 10 ~ 215 mmHg 

MEAN 20 ~ 235 mmHg
Pediatric Mode
SYS 40 ~ 200 mmHg 
DIA 10 ~ 150 mmHg 
MEAN 20 ~ 165 mmHg
Neonatal Mode
SYS 40 ~ 135 mmHg 
DIA 10 ~ 100 mmHg 
MEAN 20 ~ 110 mmHg

Resolution 1mmHg
Accuracy Maximum Mean error ±5mmHg
Maximum Standard deviation ±8mmHg
Overpressure Protection Adult Mode 297±3 mmHg 
Pediatric Mode 240±3 mmHg 
Neonatal Mode 147±3 mmHg

SpO2
Measuring Range 0 ~ 100 % 
Alarm Range 0 ~ 100 % 
Resolution 1 %
Accuracy 70% ~ 100% 2 %
0% ~ 69% unspecified
Actualization intervalabout 1 Sec. 
Alarm Delay 10 Sec.
Pulse Rate Measuring and Alarm Range 20~300 bpm
Resolution 1bpm
Accuracy ±3bpm

TEMP
Channel 2
Measuring and Alarm Range 0 ~ 50 ºC
Resolution 0.1 ºC
Accuracy ±0.2 ºC
Actualization intervalabout 1 Sec.
Average Time Constant < 10 Sec.

 

ECG

SPO2

NIBP

RESP

TEMP